12v Milwaukee Heating Element

The following is the introduction of high quality 12v Milwaukee Heating Element GRWAY®, hoping to help you better understand 12v Milwaukee Heating Element.

Features of 12v Milwaukee Heating Element

2. 750°F Max Temperature

3. 60W-90W heat output

4. Maintains temperature throughout toughest applications

Parameter of 12v Milwaukee Heating Element

12V Milwaukee Soldering Heating Element Application

M12

M18

Milwaukee Cordless Soldering Iron;

Milwaukee Power Tool

Handling and notice of using 12V Milwaukee Soldering Heating Element

①. Don’t give the ceramic heater impact like falling down to the ground or strike it by hammer forcefully.

②. Using ceramic heater at rating voltage(@12V).

High voltage may cause the damage of ceramic heater.

③. Temperature control device should be used on ceramic heater

And the surface temperature of ceramic heater should no more than 800℃,

since the temperature is closely related to its working life.

④. Don’t use ceramic heater on following conditions: quick heat up, quick cool down and uneven heat distribution. Because on the above conditions open circuit. cracking problems may happen. Please be careful of heat shock besides other situations that are not mentioned here such as incompletely contact with metal part that will also cause uneven heat distribution.

⑤. Don’t put excess strength to Ni-wire and brazing area.If Ni wires were bent many times, power concentration points will become brittle. Crack even breakage may happen. If pulled Ni wires with excess power, brazing area will be peeled off.

⑥. Don’t use the ceramic heater for medical, nuclear and aero purpose.