Alumina Ceramic Heating Plate For Hair Straightener

Alumina Ceramic Heating Plate for Hair Straightener

GRWAY® Alumina Ceramic Heating Plate for Hair Straightener made by 95% Al3O2 developed based on ceramic lamination technologies, which are mainly used for automotive and various industrial applications such as soldering iron, kerosene & gas equipment, pellet burner and water heating.

MCH metal ceramic heater Plate

Definition: refers to Alumina Ceramic Heating Plate for Hair Straightener in which metal tungsten or molybdenum manganese paste is printed on a ceramic casting body and laminated by hot pressing and then co-fired at 1600 deg C,in hydrogen atmosphere t co-sinter ceramic and metal.

Process of Alumina Ceramic Heating Plate for Hair Straightener

Internal Heating elements are protected from oxidation due to sintering into one-piece ceramic body structure.

General Information of Alumina Ceramic Heating Plate for Hair Straightener:

Substrate: White multi-layer alumina ceramics,.-Al2O3 content not less than 95%

Lead: In aф0. 5mm of Nickel wire.

Casing, tape: Teflon, high temperature resistance to high temperature

Resistance: high temperature materials such as tungsten, etc.

Product thickness: 0.7 ~ 2.0. Customizable

Use voltage: 3.7 V, 4.5 V, 5 V, 7 V, 6 V, 9 V, 12 V 24 V, 36 V, 110 V, 220 V, 380 V can be customized.

Resistance Selection: 0.3 ~ 1500 ohm, according to voltage, chip size power and customer demand selection.

The surface temperature of aluminum ceramic heating plates can reach 200°C in seconds and 500°C in 30 seconds, the max and steady temperature can be up to 600-800°C which depends on the heat sink. Ceramic heater pass 60 minutes 'ON', 60 minutes 'OFF' for 1000 cycles life test at around 280°C.

Perfect for scientific research in lab environment due to its small size, high power density, high temperature and excellent insulation.

Already Open Model for your choice